Installing Harness System - Safety 1st Alpha Omega 65 Manuel De L'utilisateur

WARNINGS:
Do not use child restraint or booster seat
without the seat pad. Failure to do this can result in seri-
ous injury or death.
Cleaning Pad and Accessories
Machine wash all pieces separately with cold water on a gentle
cycle. Make sure harness covers are closed so fastening strips
are not exposed. Do not use bleach. Tumble dry separately for
10-12 minutes on low heat. Remove immediately.
Cleaning Harness Strap
Spot clean using warm sudsy water and damp cloth.
Replacing Pad
Gently pull headrest pad onto headrest. Starting from bottom of
child restraint, slip pad on shell. Pull harness adjustment strap
through pad. Make sure pad is behind headrest and backrest.
Install harness guides. Attach all of the elastic straps. Install
harness system, see pages 16-18.
15

Installing Harness System

1. Fully Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
2. Insert Buckle's Metal
Retainer into Slot
Closest to Child
Buckle
3. Reach Under Seat
Between Base and Shell
Pull metal retainer completely
through pad and shell.
4. Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST face out.
MUST not pull out.
continued on next page
16