Safety 1st Alpha Omega 65 Manuel De L'utilisateur page 22

5. Reach Under Pad and
Pull Vehicle Belt Across
the Shell
Do not twist belt.
Belt
and under pad.
Buckle vehicle belt. Replace pad over corners.
6. Tighten Belt
Place hand in child restraint.
Firmly push down and towards
the vehicle seat back while pulling
shoulder belt or free end of lap
belt to tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
7. Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
It should not move more than 2.5
cm (1 in.).
37
MUST be behind buckle strap
If it moves more than 2.5 cm (1 in.),
A. Pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to UAS belt installation if UAS anchors are
available in your vehicle.
8. Secure Child in Child
Restraint
Recheck the level lines to make
sure it is reclined according to
your child's weight.
Repeat steps 3-7 if not
reclined correctly.
You may need to place a large
rolled towel(s) or foam pool
noodle(s) under front of child
restraint to help achieve the correct
recline angle.
Check often to be sure padding is
still in place and the belt is tight.
you can try:
38