Safety 1st Alpha Omega 65 Manuel De L'utilisateur page 12

5. Rethread Harness
Strap
With sewn end of harness
strap loop facing the buckle,
thread harness strap down
through hip harness guide.
6. Pull Harness Strap
Across Shell and Up
Through Opposite Hip
Harness Guide
Make sure the harness strap is
between shell and base and not
underneath only the seat pad.
Harness adjustment strap
lay above the harness strap as
shown.
7. Make Harness Strap
Even
Sewn ends of harness strap loops
MUST
8. Thread Buckle and
Chest Clip
Harness strap ends go through
the back of buckle tongues and
through the chest clip front to
back as shown.
17
MUST
face each other.
9. Thread Harness
Strap Into Shoulder
Harness Guides
10. From Back, Thread
Harness Strap OVER
Metal Bar
DO NOT twist harness strap.
11. Attach Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap
Sewn
loops
End
DO NOT twist harness strap or
Correct
harness adjustment strap.
Make sure the same harness strap loops are fitted
COMPLETELY ON both sides of the splitter plate.
WARNINGS:
Failure to place the harness
adjustment strap between shell and the
harness straps as shown can result in serious
injury or death.
Harness strap MUST be threaded over the metal headrest
adjustment bar.
Harness system must be installed correctly.
Failure to follow these warnings can result in serious
injury or death.
MUST face towards you.
18