Configuration Of The Baud Rate Baud - M5 - Parker Senso Control SCE - 0 20 Mode D'emploi

4.3.2 Data output format with a decimal comma –
( M2.2)
The corresponding configuration is undertaken together with to
Section 4.2.1. M2.2 is selected with the + / - key and the parameter
selection is activated by pressing the SET key. The position of the
decimal comma is set with the + / - keys. The data format consists
of the number of decimal places and a decimal comma. Pressing the
SET key ends the setting. (see also Section 4.2.1.)
When working with data transfer to a PC, please pay attention to the
format you need.

4.3.3 Configuration of the baud rate bAud - M5

The baud rate determines the transfer speed from SCE to the
receiving instrument (PC or PLC, respectively).
M5 is selected with the + / - keys and the parameter selection is
activated with SET . Set the baud rate with the + / - keys . Four
settings using the + / - keys are possible. The setting procedure is
ended by pressing the SET key.
Baud rate
1200 bit/s
2400 bit/s
9600 bit/s
19200 bit/s
bAud (select +/- SET)
001.2
002.4
009.6
019.2
- 12 -