Operation; Install The Servicejunior; Switch On The Servicejunior - Parker ServiceJunior SCJN Série Manuel D'utilisation

4. Operation

4.1

Install the ServiceJunior

NOTIFICATION
Material damage due to excessive force.
► Only ever hand-tighten the ServiceJunior (together with the
pre-installed adapter)!
► If you operate the ServiceJunior SCJN without an adapt-
er, maintain the permitted tightening torque of 35 Nm.
1
Mount the ServiceJunior in the desired position using the
pre-installed adapter.
4.2

Switch on the ServiceJunior

The ServiceJunior is supplied from the factory with built-in batteries.
1
Press the ON/OFF key.
ª The ServiceJunior starts and carries out a self-test.
ª The current settings are displayed one after the other.
V1.0/01/20
Operation
15