DAITEM DP8000 Serie Mode D'emploi page 33

O v e r v i e w
The universal transmitter is used for the
protection of exits (doors, windows...) or
roller shutters.
It has an integral contact to detect the
opening of an exit and a terminal block
allowing connection of hardwired contacts
or remote sensors, such as:
door contacts,
roller shutter sensor,
piezoelectric glass-break sensors,
shock sensors,
pressure mat.
Guarantee
label
Cable pass
Terminal block
for connection
of remote con-
tacts or
sensors
Battery connector
Tamper
switch
Programming
0 1
LED
O
N
Integral
1 2
contact
0 and 1 programming
buttons
P r e p a r a t i o n
Opening
Unclip the front cover.
Detach the pre-perforated removable
section of the guarantee label (under the
lithium block) and affix it to the guarantee
extension request supplied with the control
panel or the telephone transmitter.
In case of addition to an existing system,
affix the guarantee label to the guarantee
extension request supplied with the
product.
Switches
for choice of
contacts
Power supply
Connect the lithium block. In case of modi-
fication of the 2 micro-switch positions,
down-power then re-power the universal
transmitter in order to register the new
selection.
Test LED
Test button
Opening tab
GB
33