Stuv 21 Instructions page 17

installation
getting the stove ready
Using a small slot screwdriver, open
the 4 tongue pieces found on the
uprights on the front of the stove
[photos 1 & 2] to a horizontal
position.
Placing the frame on the stove
Make sure the frame is the right way
around [photo 3]. The stove model is
indicated on the left-hand side of the
frame.
Slide the frame onto the 4 tongue
pieces opened earlier [photo 4, 5 & 6].
Using a tape measure, check the
frame is flush with the Stûv 21
damper cover plate [photo 7].
Using a hammer, knock the 4 lugs of
the tongue pieces into position.
1
3
5
7
2
4
6
8
instructions for installing the Stûv 21 fine frame - 0410
SN 0007187 - ...
en
17