shark Heritage Mode D'emploi page 8

VISoR
A
C
RemoVAl
- Move the visor to the lower position
- Pull the visor delicately downward
(Fig. A);
- Pull the visor forward, one side at a time,
to unclip it from the mounting points in the
helmet (Fig. B).
RePlAcement
We recommend
gloves to keep the visor clean during
installation. Carry out the above operation
in reverse order;
8
wearing cotton
B
D
- Push, at one side at a time, the visor
forward to clip it onto the mounting points in
the helmet (Fig. A);
- And then clip the visor.
WARnInG: If your visor no longer provides
you with clear visibility, you must immedia-
tely replace it. Never ride if your visor is
scratched, dirty, foggy or with your vision
obscured in any way.
perfect visibility.
Always ride with