Audio Connections - Martin Logan Motion Vision X Manuel De L'utilisateur

source, you may need to set the player's digital
audio output to "Bitstream" (also called "Raw",
"Direct Digital", or "High Bit Rate"). If "PCM" is
selected you'll lose the multi-channel encoded
sound. Some players only require you to turn
PCM off to configure for multi-channel encoded
a I
n ntroductIon to
HDMI: HDMI utilizes one cable to pass high-definition video signals and multi-
Digital Optical: Digital optical utilizes one cable to pass digital audio
Digital Coaxial: Digital coaxial utilizes one cable to pass digital audio information (no
video). A digital coaxial cable offers a high-quality digital connection and passes
designed specifically for digital coaxial connections should be employed—do not use a standard left/
right analog RCA style cable because it will likely not be up to the task of handling the high bit-rate nec-
essary for a reliable digital connection.
Analog Left/Right RCA to Stereo 3.5mm: Analog cables are used to pass
audio information (no video). Older gaming consoles, portable media player
to stereo 3.5mm cable.
be connected to a local area network (via a Wi-Fi or Ethernet connection).
a
udIo
channel encoded digital audio between a source component and television
or receiver. Your soundbar is not equipped with an HDMI input. However,
in many installations you will want to use HDMI to connect a video source
component to your television (to pass video) and an additional digital optical
or digital coaxial cable (to pass audio) to the soundbar.
information (no video). A digital optical cable offers a high-quality digital
connection and passes multi-channel encoded audio between a source
component and an audio output device.
multi-channel encoded audio between a source component and an audio output
device. Please note: The 'RCA' style end of a digital coaxial cable is identical
to those found on common left/right analog RCA cables. However, a cable
docks, VCRs and similar source components (which are not capable of playing
multi-channel encoded content) will often offer connection only through left/
right analog RCA cables. To connect to these devices use a Left/Right RCA
Play-Fi : This audio streaming technology allows a wide variety of devices
®
to connect to an audio output device and stream audio. Play-Fi establishes a
connection directly with an audio output device and requires both devices to
sound. Please refer to your player's manual.
• In a setup where HDMI is used to connect your
audio/video source component to your television,
you will likely need to run an additional digital
optical or coaxial cable between the source com-
ponent and your soundbar. This extra connection
c
onnectIons
11