Medion P89400 Mode D'emploi page 97

GSM Fail Tip
Notification of a SIM/GSM signal problem.
Deactivate this function if you only want to use the alarm system in PSTN
mode.
Keypad Tones
Here you can switch the tone that sounds when making entries on the key-
pad on the base station on or off.
Access Code
NOTICE!
It is recommended that you change all codes before using your system for
the first time and keep these codes secret.
Admin Code
The admin code enables you to access the menu.
Default admin code: 123456
User Code
The user code enables you to arm or disarm the system at the control panel.
The user code is the access code requested when you call the base station.
Default user code: 1234
Duress Code
If you are forced to disarm the system in an emergency, it is recommended
that you use the duress code to disarm the system. The base station will si-
lently call the saved phone numbers.
Default duress code: 0000
Open Door Code
This code can be used to open electronic doors. The door must be wired up
to the [LOCK] interface on the rear of the base station.
Default open door code: 8888
Ring Times
This function is used to define how many times the base station rings before
the call is accepted (for controlling the system by phone call).
96 of 168