Wireless Siren; Connecting Accessories To The Cable Terminals In The Base Station - Medion P89400 Mode D'emploi

Wireless siren

The wireless siren can be mounted on vertical and flat surfaces such as walls
or pillars. The mains adapter for the siren may only be used in indoor rooms.
The wireless siren will sound as soon as sensors or the base station have
triggered the alarm.
Integrated rechargeable battery
There is a rechargeable battery in the wireless siren that is charged when
the siren is provided with electricity via the mains adapter. The wireless siren
can thus even sound the alarm in the event of a power cut.
Sabotage contact
If the wireless siren is removed from the surface to which it is mounted, the
sabotage contact will automatically trigger the alarm.
Connecting accessories to the cable
terminals in the base station
You can connect external devices e.g. lights, sirens, sensors or electrical
locks to the cable terminals in the base station and control them.
The connections on the rear of the base station are assigned as follows:
VCC
Z1
signed to the 24 Hour Zone
GND
SP
GND
LOCK P1
Connection (12 V +) for wired sensors
Connection (12 V +) for wired sensors that are as-
Earth (-)
Connection (12 V +) for wired sirens
Earth (-)
Connection (12 V +) for an electronic door lock
DE
EN
FR
91 of 168