Arming/Disarming The Alarm System By App (Only In Gsm Mode); Using Accessories With The Alarm System; Radio Remote Control - Medion P89400 Mode D'emploi

Arming/disarming the alarm system by app (only in
GSM mode):
Click on "Arm" or "Disarm" in the app. The app can be downloaded from the
App Store or via Google Play (see "Installing the app on an Android/Apple
smartphone/tablet PC" on page 84).

Using accessories with the alarm system

Radio remote control

The radio remote control can be used to control the main functions of the
wireless alarm system.
Changing the battery
A 3 V button cell battery, type 2025, is already inserted in the radio remote
control on delivery.
If this battery is flat, replace it with a new button cell
battery of the same type.
1. Remove the rubber cap on the underneath of the
remote control and remove the cross-headed screw
below it.
2. Separate both housing shells for the remote control
from one another.
3. Remove the keypad and take the circuit board out of
the housing.
4. Turn the circuit board over and remove the button
cell battery from the clip in the battery holder as
shown in the adjacent drawing.
Arming the system
− Press the arm button "
(a beep is emitted by the base station). The system is armed.
If an intruder is detected, the siren will sound. (In the default settings, the
siren will switch itself off after 3 minutes.) In the meantime, the system will
automatically call the saved numbers.
" to arm the alarm system. The display lights up
DE
EN
FR
87 of 168