Arming/Disarming The Alarm System Via The Base Station; Via Rfid Tag (Only Disarming); Arming/Disarming The Alarm System By Sms (Only In Gsm Mode) - Medion P89400 Mode D'emploi

NOTICE!
Once the system has been installed, you should change the user code to your
own personal code in the System Settings/Access Code/User Code menu.
Admin Code
• The six-digit admin code is used to call up the menu.
• In the factory settings, the admin code is 123456.
NOTICE!
Once the system has been installed, you should change the admin code to
your own personal code in the System Settings/Access Code/Admin Code
menu.
Arming/disarming the alarm system via the base
station
− Enter the four-digit user code and then press the
(depending on whether you want to arm or disarm the wireless alarm
system).

Via RFID tag (only disarming)

− Swipe the RFID tag across the front of the RFID reader on the base station.
NOTICE!
If the system has been disarmed using an RFID tag, an SMS notification is
sent. An SMS number needs to be saved to the system for this purpose and
the RFID tag renamed, as described under "Registering an RFID tag" on page
82 (up to 4 RFID tags can be renamed). If multiple SMS numbers are saved
to the system, only the first number saved will receive the SMS notifications
when the system has been disarmed using an RFID tag.
Arming/disarming the alarm system by SMS (only in
GSM mode)
− Arm the system: send "
base station.
− Disarm the system: send "
the base station.
86 of 168
1
" via SMS to the number for the SIM card in the
0
" via SMS to the number for the SIM card in
or buttons