System Settings Menu - Medion P89400 Mode D'emploi

System Settings menu

Date/Time
Set the time and date here.
Entry/Exit Delay
Here you can set the entry and exit delay between 0 and 300 seconds.
This function can be used if you do not want to carry a remote control or
RFID tag around with you. When the system is armed, a beep will sound
every second to remind you to leave your home. The beeps become more
frequent during the final 10 seconds. If an intruder is detected, the alarm will
be correspondingly delayed.
The entry and exit delay is only valid for sensors that are allocated to the De-
lay Zone.
• The Entry Delay gives you time to disarm the system at the base station
without triggering an alarm.
• The Exit Delay gives you time to arm the system at the base station
without triggering an alarm.
Auto Arm/Disarm
• The system can be set up in such a way that it is armed or disarmed
automatically at a specifi ed time of the day.
• Setting the Auto Arm Time and Auto Disarm Time at precisely the same
times deactivates this function.
Control by Phone
You can activate or deactivate control of your system by phone call. Activat-
ing control by phone call enables you to arm and disarm the system and to
monitor your home by phone call.
You can find instructions and information on controlling the system by
phone call under "Control by phone call" on page 98.
Linect Alarm
If the line cut function has been activated, the alarm is triggered if the
phone line is down. The first saved SMS number will then receive a notifica-
tion via SMS (only in GSM mode).
Deactivate this function if you only want to use the alarm system in GSM
mode.
DE
EN
FR
95 of 168