Registering Accessories To The Base Station; Registering A Remote Control; Calling Up The Menu Settings On The Base Station - Medion P89400 Mode D'emploi

Registering accessories to the base station

In order to set up the alarm system, it is necessary to register all of the com-
ponents such as the motion sensors, door/window contacts and remote
controls to the base station. Proceed as described below.

Calling up the menu settings on the base station

− In order to open the setup menu, it is necessary to disarm the system
("Arming/disarming the alarm system" on page 85).
− Enter your admin code on the base station and press Enter (default
admin code: 123456)
− Use the "↑" and "↓" buttons to navigate to the desired setting and
open the menu or submenu by pressing "Enter".
Using the keypad
"*" = delete
"↓" = forward
"↑" = back
"Enter" = select/confirm
"Esc" = back/previous step in menu/cancel

Registering a remote control

1. Open the Accessories/Remote/Add a new menu on the base station.
2. Pls Connect appears on the display.
3. Now press the "
to the base station within 30 seconds.
4. As soon as you hear a confirmation tone, the remote control has been
registered to the base station.
NOTICE!
You can find instructions for checking whether the registration has been
completed correctly under "Test mode" on page 94.
80 of 168
" button on the remote control that you want to register