Registering An Rfid Tag; Registering An Wireless Siren - Medion P89400 Mode D'emploi

NOTICE!
You can find instructions for checking whether the registration has been
completed correctly under "Test mode" on page 94.

Registering an RFID tag

The RFID tag can arm or disarm the wireless alarm system or unlock elec-
tronic door locks.
1. Open the Accessories/RFID Tag/Add a new menu on the base station.
2. Pls Connect appears on the display.
3. Now hold the RFID tag that you want to register to the base station
against the RFID tag reader on the base station within 30 seconds.
4. As soon as you hear a confirmation tone, the RFID tag has been registered
to the base station.

Registering an wireless siren

The signal to the wireless siren is transmitted wirelessly. You can install
multiple wireless sirens in different positions and register them to the base
station for your alarm system in order to prevent illegal access to your prop-
erty. If an intruder is detected by your alarm system, the siren will sound and
the stroboscope light switches on. The wireless siren can also be used as a
stand-alone alarm system by registering the other accessories directly to
the siren (see "Direct registering of accessories to the wireless siren" on page
83).
If the wireless siren is being used as an additional siren together with the
wireless alarm system, the base station for the alarm system must be regis-
tered to the siren:
1. Place the wireless siren near to the base station to register the base sta-
tion to it.
2. Irrespective of whether the system is armed or disarmed, press the con-
nection button to switch to connection mode. The LED display lights up:
you will now be in connection mode for 20 seconds.
3. Press one of the buttons SOS, Arm or Disarm within 20 seconds to register
the base station to the wireless siren.
82 of 168