Porsche Charge-o-mat Pro Mode D'emploi page 10

TECHNICAL SPECIFICATIONS
1049
Model number
Rated Voltage AC 220–240VAC, 50–60Hz
Charging voltage
- Lead-acid
Charging voltage
- Lithium-Ion
Min battery voltage 2.0V
Charging current 5A max
Current, mains 0.7Arms (at full charging current)
Back current drain Less than 1Ah/month
4
Less than 4%
Ripple 5
Ambient temperature -20°C to +50°C, output power is reduced
automatically at high temperatures
Fully automatic charging cycle
Charger type
Battery types All types of 12V lead-acid batteries (WET,
MF, Ca/Ca, AGM and GEL) and 12V
LiFePO
Battery capacity
- Lead acid
Battery capacity
- Lithium-Ion
Dimensions 168 x 65 x 38mm (L x W x H)
Insulation class IP20
Back current drain is the current that drains the battery if the charger is not
4
connected to the mains. This battery charger has a very low back current.
14.4V, 14.7V
13.6V
batteries.
4
1.2–14Ah, 14–160Ah
5–120Ah
The quality of the charging voltage and charging current is very important.
5
A high current ripple heats up the battery which has an aging effect on the
positive electrode. High voltage ripple could harm other equipment that is
connected to the battery. This battery charger produce very clean voltage
and current with low ripple.
EN • 11