Maintenance And Cleaning - IKA IC control Mode D'emploi

The device is maintenance-free. It is only subject to the
natural wear and tear of components and their statistical
failure rate.
Cleaning
Disconnect main plug prior to
cleaning!
Use only cleaning agents which have been approved by
IKA to clean IKA device.
® ®
Dirt Cleaning agent
Dye isopropyl alcohol
Construction material water containing tenside/isopropyl alcohol
Cosmetics water containing tenside/isopropyl alcohol
Foodstuffs water containing tenside
Fuel water containing tenside
For materials which are not listed, please request
information from IKA ®
Wear protective gloves while cleaning the device.
Electrical device may not be placed in the cleansing agent
for the purpose of cleaning.
Do not allow moisture to get into the device when cleaning.
Before performing a non-recommended method of clean-
ing or decontamination, the user must ascertain with
IKA ® that this method will not damage the device.

Maintenance and cleaning

application support.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Serial number, see type plate
- Item and designation of the spare part,
see www.ika.com, spare parts diagram and spare
parts list.
- Software version.
Repair
Please send instrument for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For this you should request the "Decontamination
Clearance Certificate" from IKA
printout of it from the IKA
Return the instrument in its original packaging. Storage
packaging is not sufficient. Please also use suitable trans-
port packaging.
, or use the download
®
website www.ika.com.
®
48