Dimplex XHD28L Manuel D'utilisation page 8

Installation
Mounting
1
. For media models, carefully
disperse the supplied small acrylic
crystals in the media tray of the
firebox, and arrange large acrylic
crystals near the flame panel.
!
NOTE: If using media accessory
kit XHDDW-KIT (for XHD26G &
XHD28G) or XHDDW-KIT33 (for
XHD33G), omit supplied crystals,
disperse the river rocks in the media
tray, and arrange driftwood on top.
Media
Tray
8
2a.
If installing into a Dimplex mantel,
first check to see if there are holes
in the side panels near the top as
shown below. If so, align the front
of the firebox (without front glass
installed) with the front face of the
mantel. Install provided screws
into the front holes on the inside
faces of the firebox. The screw will
line up with the hole in the mantel,
securing it in place.
Holes in
side panels
www.dimplex.com