TSI ALNOR LOFLO BALOMETER Manuel Du Propriétaire page 9

Instrument Storage
The hood and frame assemblies can be detached
from the instrument base and placed inside their
own carrying case without disassembly.
®
The LoFlo Balometer Capture Hood should
always be turned off before re-packing the
instrument. If storing the LoFlo Balometer
Capture Hood for an extended period of time,
remove the batteries to prevent damage due to
leakage.
Battery Installation
To install the 4 C-size batteries that ship with the
®
LoFlo Balometer Capture Hood:
1. Make sure the LoFlo Balometer
Hood switch is off.
3
®
®
Capture
2. Remove the battery cover located on top of
the meter.
3. Slide the battery holder up until the snap
connector is exposed.
4. Disconnect the battery holder from the LoFlo
®
Balometer Capture Hood.
5. Install the 4 C size batteries in the holder.
6. Reconnect the snap connector and slide the
battery holder into the battery compartment.
7. Replace battery cover.
3