How To Connect The Open-Collector Inputs Of The Controller - Agilent Technologies TV 301SF Notice De Mode D'emploi

Figure 17
How to Connect the Open-Collector Inputs
of the Controller
Here below there are the typical connections of the open collector
input of TV 301SF Navigator to an external system. Two cases are
considered:
1.
2.
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
TV 301SF Navigator User Manual /
the customer supplies the 24 Vdc
the customer does not supply the 24 Vdc.
87-900-957-01 (H)
Technical Information
Interconnections
255/300
17