Agilent Technologies TV 301SF Notice De Mode D'emploi page 274

17 Technical Information
Air Cooling Kit Installation
When the pump is supplied by the rack C.U. 969-9437 or 969-9537
please utilize the special fan extension cable 969-9949.
To fix the fan to the TV 301SF case execute the following procedure
(see the following figure):
1
2
Figure 29
274/300
If the controller will be installed on board at the bottom of the
pump, fix the fan bracket to the pump body between the pump
and the controller by means of the fixing studs (the same used to
fix the controller on board);
Connect the fan supply to the P4 connector of the controller.
TV 301SF Navigator User Manual / 87-900-957-01 (H)