Dentsply Sirona MAILLEFER Thermaprep Instructions D'utilisation page 4

3) COMPATIBLE DEVICES
The Thermaprep
®
Obturator core Obturator brand
Gutta percha WaveOne Gold
WaveOne Gold
Plastic
ProTaper
4) WARNINGS
Do not touch any hot surfaces. Surfaces that might get hot during operation are marked with warning
sign .
When encountering warning sign
Disconnect the mains power plug before cleaning the heating chambers.
5) PRECAUTIONS
• To prevent fire or electric shock, do not expose this product to moisture.
• The product does not have an ON/OFF switch. In order to disconnect the product from the mains power,
unplug the mains power connector.
• Unplug the oven while not in use.
• Do not remove the cover of the oven.
• This oven is designed for use in a clinical or hospital environment. Do not use in any other environment.
• To reduce the risk of electric shock, do not remove cover; there are no user-serviceable parts inside.
• This oven is intended for heating gutta-percha coated obturators only. Do not insert anything other than
an obturator into the oven.
• Changes or modifications not expressly approved by the distributor could void the user's authority to
operate the equipment.
• Always follow the instructions for use when using the product. Product safety and performance are
guaranteed only if the product is used in accordance with the instructions for use and its intended use.
Thermaprep®
Obturator Oven
Obturator Oven is compatible with the following endodontic obturator brands:
Obturator size
GuttaCore 20 to 90
®
GuttaCore for Small - Primary -
®
Medium - Large
™
GuttaCore for
®
X2 / X3 / X4 / X5
ProTaper Next
®
20 to 25
Thermafil
® 30 to 60
70 to 140
Small - Primary
Thermafil for
®
™
Medium - Large
F1 - F2
Thermafil for
®
Universal
®
F3 - F4 - F5
F1 - F2
Thermafil for
®
ProTaper Gold
®
F3 - F4 - F5
consult the instructions for use (this document).
END-IFU-THERMAPREP-V01-WEB-EUR-multilingual-2021-05
Heat setting Signal time
Setting 1 20 seconds
Setting 1 20 seconds
Setting 1 20 seconds
Setting 1 20 seconds
Setting 2 44 seconds
Setting 3 49 seconds
Setting 1 20 seconds
Setting 2 44 Seconds
Setting 1 20 seconds
Setting 2 44 Seconds
Setting 1 20 seconds
Setting 2 44 Seconds
Tolerance
± 5 Seconds
± 5 Seconds
± 5 Seconds
± 5 Seconds
± 7 Seconds
± 8 Seconds
± 5 Seconds
± 7 Seconds
± 5 Seconds
± 7 Seconds
± 5 Seconds
± 7 Seconds
4/219