Specifications - Amprobe UAT-505 Guide D'utilisation

6. SPECIFICATIONS

UAT-500-T Transmitter
Operating voltage
Transmitting frequency
Tracing modes
Transmitting mode power output
Output voltage
Output current
Visual signal indication
Audio signal indication
Compatible receiver
Compatible accessories
Operating temperature and
humidity
Storage temperature and
humidity
Operating altitude
Pollution degree
IP-rating
Power supply
Battery life
Low battery indication
Agency approval
Safety compliance
Electromagnetic Compatibility
Size (H x W x L)
Weight
De-energized circuit only for Direct Connection Mode
33 kHz
De-energized:
- Induction Mode
- Direct Connection Mode
- Clamp Mode
Max. 1 watt
Max. 35 V rms
Max. 100 mA rms
Two LEDs indicating LO and HI signal
Continuous Signal Mode: Continuous audio tone
Pulse Signal Mode: Fast pulsed audio tone
UAT-600-R Receiver
SC-600 Signal Clamp
TL-UAT-500 Test lead set
-4 °F to 122 °F (-20 °C to 50 °C), ≤ 80% RH
-40 °F to 140 °F (-40 °C to 60 °C), ≤ 80% RH
< 6561 ft (< 2000 m)
2
IP54
Four (4) 1.5 V D cell alkaline batteries
Approx. 12 hours at 70 °F (21 °C) (Typical)
Both LO and HI LEDs blink every 1.5 seconds and audio sound pulses every
1.5 seconds
�
IEC 61010-1, CSA/UL 61010-1,
IEC 61010-031, CSA/UL 61010-031 (test leads)
IEC 61326-1 Korea (KCC): Class A Equipment (Industrial Broadcasting &
Communication Equipment)
[1]
This product meets requirements for industrial (Class A) electromagnetic
wave equipment and the seller or user should take notice of it. This equipment
is intended for use in business environments and is not to be used in homes.
Approx. 18.1 x 3.5 x 2.6 in (460 x 90 x 65 mm)
Approx. 3.9 lb (1.77 kg) (batteries installed)
21
[1]