Proper Access To Model - Modine ECO MIC Manuel Technique

Proper acces to model
Support brackets
Electric heater
Inner drip tray
Access
1. Disconnect condensate drain connection as to avoid hampe-
ring with fan shroud.
2. Loosen and remove fastening screws "A" of fan shroud (note
that some models have fastening screws on the hinge side).
3. Bring fan shroud to the position shown in drawing.
4. To reach heaters located under coil, remove the inner drip
trays by unfastening the self-threading screws "B"; the hea-
ters are fastened with clips "C" as per drawing in previous
page.
Remounting
1. Reposition the drip trays by fastening screws "B".
2. Reposition the fan shroud and fasten with screws "A".
3. Reconnect condensate drain connection.
12
www.modinecoolers.com
Heater junction box
Motor junction box
Fan shroud