Nsre-S200 Connection Example - Sony IPELA NSR Serie Manuel D'installation

Notes
• Do not connect the monitors to HDMI monitor
connectors 1 and 2.
• Do not connect a monitor to analog RGB monitor
connector 1 on the front of the unit while the unit is on.
Example 3) When connecting an HDMI monitor
and analog RGB monitor (HDMI monitor used
for operations)
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4
: Audio output locations.
Note
Use HDMI monitor connector 1 and analog RGB
monitor connector 2 for connections.
Example 4) When connecting an HDMI monitor
and analog RGB monitor (analog RGB monitor
used for operations)
POWER NETWORK 1 2 3 HDD 1 2 3 4 STATUS 1 2 3 4
: Audio output locations.
Note
Use analog RGB monitor connector 1 and HDMI
monitor connector 2 for connections.
30
Connection Examples
Audio amplifier
(connect to
ERROR REC
audio output
connectors
(L/R))
ERROR REC
Audio amplifier

NSRE-S200 Connection Example

You can connect up to seven optional NSRE-S200 units
to the NSR-1200/1100/1050H in the following tree
configurations.
Note
The mini-SAS cable used for connection is supplied
with the NSRE-S200. Always use the supplied cable.
We recommend connecting NSRE-S200 expansions in
the following order.
NSR-1000 series
Mini-SAS output connector
Mini-SAS cable
NSRE-S200
1
Mini-SAS input connector
NSRE-S200
2
4 5 6
NSRE-S200
The following is the list displayed when units are
connected in Position #1, #3, and #6. Be aware that the
Volume # is displayed in the order in which the
partitions were configured.
NSRE-S200
3
7