Sony IPELA NSR Serie Manuel D'installation page 25

For further details on settings, refer to "Registering
Devices" in the User's Guide (PDF).
↓
The cameras are registered.
↓
To configure alarm recording
Select [Automatic Alarm Record], and click [Next].
↓
A confirmation screen appears.
Click [Next].
↓
Verify configurations, and click [Finish].
↓
Alarm recording starts.
When configuration is complete, the "Main" screen
appears.
After performing basic configuration, the values for
each setting will be as follows.
Setting Scheduled
recording
Image size Maximum image size
supported by the
1)
camera.
Codec Depends on the
Schedule Record
settings configured in
the [Video] tab.
Frame rate Depends on storage
duration for recorded
1)
data.
1)
Quality 50%
Level 3 (cameras with
5 level settings)
Level 5 (cameras with
10 level settings)
Bitrate Depends on storage
duration for recorded
1)
data.
Recording –
trigger
Alarm recording
Depends on the Alarm/
Event Record settings
configured in the
[Video] tab.
Depends on the Alarm/
Event Record settings
configured in the
[Video] tab.
Depends on the Alarm/
Event Record settings
configured in the
[Video] tab.
Depends on the Alarm/
Event Record settings
configured in the
[Video] tab.
Depends on the Alarm/
Event Record settings
configured in the
[Video] tab.
VMD (Camera)
VMD (Recorder) if the
camera is not supported.
JPEG: Standard mode
MPEG4, H.264:
High-performance
mode
25
Step 3: Settings