Logging On; Performing Basic Configuration - Sony IPELA NSR Serie Manuel D'installation

The unit restarts.
↓
The logon screen appears.
Continue to the following section, "Logging On."
To access the Setup Menu from the logon
screen
Click [Administration Menu].
1
↓
Click [Setup Menu].
2
When patch files are available
You can install patch files distributed by Sony onto the
NSR.
Patch files are distributed by Sony as more NSR-
compatible cameras and functions are added. We
recommend installing these patch files to operate the
NSR using the most up to date software.
For details on installing the patch files, see "Installing
Patch Files" (page 28).
24
Step 3: Settings

Logging On

Enter the user name and password, and click [Logon].
Default user name: admin
Default password: admin
When logon is successful, the Automatic Camera
Registration dialog appears.
Continue to the following section, "Performing Basic
Configuration."

Performing Basic Configuration

This section describes how to register and configure
alarm recording for devices that are automatically
detected. For details on how to register all automatically
detected devices at once, refer to the First Step Guide
(separate document).
To register a camera
Select [Open multiple camera registration window], and
click [OK].
↓
Devices on the same network segment are automatically
detected.
↓
Select the check boxes for the cameras you want to
register, and click [Register].