If the product should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by a Würth master-
Service.
In all correspondence and spare parts orders, please always include
the article number given on the type plate of the machine.
The current spare parts list for this power tool can be viewed in the
Guarantee
For this Würth power tool, we provide a guarantee in accordance
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or improper handling is
excluded from the guarantee.
Claims can only be accepted if the power tool is sent undisassembled
customer service agent for Würth compressed-air and power tools.
Disposal
The product, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
Noise/Vibration Information
Measured sound values determined according to EN 62841.
Typically the A-weighted noise levels of the product are: Sound
pressure level 85.0 dB(A); Sound power level 96.0 dB(A). Uncertainty
K=5 dB(A).
Wear hearing protection!
Overall vibrational values (vector sum of three directions) determined
according to EN 62841:
Vibration emission value ah, B = 19.0 m/s
s
. (Cutting board)
2
Vibration emission value ah, WB = 19.2 m/s
s
. (Cutting wooden beam)
2
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications
total working period.
An estimation of the level of exposure to vibration should also take into
level over the total working period.
Identify additional safety measures to protect the operator from the
keep the hands warm, organise work patterns.
Subject to change without notice.
, uncertainty K=1.5 m/
2
, uncertainty K=1.5 m/
2
17