Würth AFS 18 COMPACT Traduction Des Instructions De Service D'origine page 16

Weight (According to EPTA procedure
01/2014)
Weight - not incl. battery pack
Ambient operating and
temperature for the tool and battery
pack
(Product performance may drop below
0°C)
Recommended ambient charging
temperature
Recommended battery type
Recommended charger
Device Elements
See page 3.
1. Blade
2. Shoe assembly
3. Blade clamp
4. Orbital action selector
5. Switch trigger
6. Speed control dial
7.
8. Handle, insulated gripping surface
9. Shoe assembly lock
10. Battery pack
Intended Use
wood, plastic, drywall, and metal up to the depth described in the
The product is designed for handheld use. The product is not to be
do this are given by the manufacturer of the product.
The product is approved for use with batteries with a minimum
capacity of 4 Ah.
For damage caused by usage other than intended, the user is
responsible.
Over Current Protection
When overloading the battery through very high power consumption,
e.g. catching of the saw blade, blunt saw blade, very high push force,
the power tool will stop.
it again.
Over Temperature Protection
temperature threshold it will stop, vibrate and hum for 3 seconds.
press it again, or release the contact force while pressing the On/
If the power tool gets heated up too much or blocked several times
during extreme applications it stops and cools down for several
minutes. During this time the power tool cannot be used.
3.3 kg (2.0 ah) -
3.6 kg (5.0 ah)
2.9 kg
storage -15°C - 40 °C
5 - 40°C
LI 18V/4 Ah BASIC
LI 18V/5 Ah BASIC
ALG 18/4 BASIC
ALG 18/6 FAST
Symbols
Read all safety warnings and all instructions.
Warning
V Volts
Direct current
No-load speed
CE conformity
EurAsian Conformity Mark
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
Battery
A battery that is new or has not been used for a longer period does
not develop its full capacity until after approx. 2 – 3 charging/
discharging cycles.
Do not place down the battery on radiators or expose it to intense
sunlight for longer periods; temperatures above 50 °C cause damage.
Keep the contacts/terminals of the charger and replaceable battery
clean. For optimal service life, fully charge the battery after use.
Dust Extraction
Dusts from materials such as lead-containing coatings, some wood
types, minerals and metal can be harmful to one's health. Touching
or breathing-in the dusts can cause allergic reactions and/or lead to
respiratory infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are considered carcinogenic,
especially in connection with wood-treatment additives (chromate,
wood preservative). Materials containing asbestos may only be
worked on by specialists.
Provide for good ventilation of the working place.
Observe the relevant regulations in your country for the materials
being worked on.
Maintenance and Cleaning
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories or storing power tools. Such preventive
safety measure reduce the risk of starting the power tool
accidentally.
For safe and proper working, always keep the product and
ventilation slots clean.
16