Mode Of Operation - Bernina 87 Mode D'emploi

Mode of operation

8
› Insert folded bias-binding into binder, pushing it through the opening
with a pointed but soft item (e.g. a toothpick) if required.
› Place fabric edge under presser foot, positioning it into the binding so
that binding wraps around edge nicely. Set needle position to allow
for edge-stitching of the binding.
› Baste or neaten quilted or multi-layered fabrics before binding.
Variant
› Use zigzag stitch to attach the binding. Set needle position so that
one swing of the needle catches the binding and the other the fabric.