Publicité
Les langues disponibles
Les langues disponibles
Preparation
› Move screws (6, 7) to front holes (if not placed there already). Set
binder guide parallel with presser foot and, at the same time, binding-
exiting channel flush with the stitch plate. Tighten the two screws.
› Check binder-/presser-foot position. The binder must be set in such
way that the clearance between presser foot and binder guide is just
wide enough for them not to interfere with each other.
› Tighten screw (3).
Sewing machine settings
Presser foot:
Presser foot for binder attachment # 95/95C
Stitch:
Straight-stitch/zigzag
Stitch width:
0/0-4mm
Stitch length:
2-3mm
Feed-dog:
Sewing position
7
Publicité
