Publicité
Les langues disponibles
Les langues disponibles
•
Corrosion-resistant output connectors.
•
Output clips and ring terminals provided: it comes with a quick connect fly lead and 2 different kinds of connectors, crocodile
clips and a ring terminals. The ring terminals are perfect for permanent connection to your battery. You can connect the lead to
the battery and tuck the lead away while you are using your vehicle and when you get back to your garage simply plug the lead
back into the charger.
•
Folding Hook: the battery charger is built with a foldable hook at the bottom of the unit, which is convenient to hook up the charger
onto the motorcycle or wall mounting desired.
When the users take off the charger from the motorcycle, they can simply fold the hook back to the bottom of the unit.
TEMPERATURE & SAFETY PROTECTION
The charger contains 4 safety protections:
•
INTERNAL OVERHEAT PROTECTION: the BS 15 is built-in with overheat and overload electronic circuit. When the charger is
overheated, the charger will decrease the charging current. If temperature is decreased, the charger will resume to normal charging.
•
TIMER PROTECTION: the charger provides the maximum charging timer management for each charging stage; this condition
may occur if attempting to charge any severely discharged or heavily sulfated battery. Once the charger is timed-out, the charger
will stop charging for protecting your battery and the RED LED will be slow FLASH, while this situation occurs, please check with
your battery statues.
•
REVERSE POLARITY: the charger has reverse battery protection. If a reverse battery exists (Red LED ON, while output leads are
connected backwards), simply unplug charger from AC power and properly remake the connections as described in this manual.
•
SHORT CIRCUIT PROTECTION: the charger has output short-circuit protection. If the charger output lead short condition exists
(Red LED ON, while output leads are connected backwards), simply unplug charger from AC power and properly remake the
connections as described in this manual. The charger employs the firm hardware and smart program to automatically detect the
output connections. Once the charger.
BATTERY TYPES & CAPACITY
•
Suits all Lead Acid Type Batteries. (GEL, SLA, AGM, Calcium)
•
12 Volt Output, Charging current 1500mA
•
Battery Capacity: The following maximum AH capacities are to be used as a general guide only: some batteries maybe able to
handle a higher Charge Current. Check with the battery Manufacturer when charging batteries with small capacity.
Charge current
1500mA
ELECTRICAL PARTS
Delivered with:
•
A.C Power Cord:
-
183cm with VDE Plug.
•
Output Lead:
-
122cm with Trailer Connector.
•
Extension Cord:
-
61cm with Trailer Connector + Battery Clamp or.
-
61cm with Trailer Connector + Ring Connector.
ENVIRONMENTAL CHARACTERISTICS
•
Operating Temperature: 0 to 40° C.
•
Storage Temperature: -10 to 80°C.
•
Operating Humidity Range: 90% RH Max.
TECHNICAL SPECIFICATIONS
Part number
BS 15
Type
Smart
Input Voltage Range
100-240Vac
Input Frequency
50/60Hz
Output
1500mA @ 12V
Size (L*W*H) in mm
140x65x35
Weight
0.45Kg
Approvals
CE, UL/cUL, AS/NZS
| www.bs-battery.com
Battery capacity: charging
4-30AH
Battery capacity: maintaining
4-120AH
4
Publicité
