Publicité
Les langues disponibles
Les langues disponibles
User Manual and Guide to professional battery
EN
charging for Starter and Deep Cycle batteries
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR 12V BATTERY CHARGER: BS 15
For lead-acid batteries: AGM, WET, CALCIUM, GEL & VRLA
IMPORTANT SAFETY INSTRUCTIONS
Please read this manual and follow the instructions carefully before using the charger.
WARNING
•
The charger is designed to charge 12V lead-acid batteries from 4Ah to 30Ah. However, charger can maintain batteries up to 120Ah.
•
We always recommend that you check the Battery Manufacturers specifications before using this charger
•
Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames and sparks.
•
For indoor use. Do not expose charger to rain, snow or liquids.
•
For charging lead-acid batteries ONLY (of the size & voltage indicated in the specifications table).
•
Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
•
The charger should be used on a flat surface.
•
Never charge a frozen battery.
•
Never charge a damaged battery.
•
Never place the charger on the battery while charging.
•
Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or shortcircuit battery or other electrical
part that may cause explosion.
•
When working with a lead-acid battery, remove personal metal items such as rings, bracelets, necklaces, watches...
•
NEVER smoke or allow a spark or flame in vicinity of battery or engine.
•
Do not charge non-rechargeable batteries.
•
In order to reduce risk of electric shock, unplug charger from AC outlet before doing any maintenance or cleaning. Turn off
controls will reduce risk.
•
The kit is not supposed to be used by children or by people who are not able to understand themanual, unless they are supervised
by a responsible person who ensures the proper use of the kit.
MAIN FEATURES
Smart Charger plus Maintenance and Rejuvenation Function
•
Easy to use: the battery charger is easy to operate and requires no technical experience.
•
Fully controlled by Microprocessor.
•
Battery initial condition diagnose.
•
Battery wiring in vehicle circuit sense.
•
Enhanced battery rejuvenation (patented technology).
•
Battery voltage retention analysis.
•
Peak pulses for long term maintenance.
•
Ultra lower power consumption for ECO mode.
•
Multi Charge Stages:
-
Battery condition check
-
Enhanced battery rejuvenation
-
Soft Start
-
Bulk Charging
•
Diagnosis & Charge - Automatic diagnosis and charge: on power up, the charger will automatically diagnoses the battery condi-
tion, and then determine if the battery charger engages the rejuvenation stage or goes into charging cycle.
•
Enhanced battery rejuvenation stage – Patented battery rejuvenation technology: the program will engage a unique rejuvena-
tion method with high voltage equalizing and peak pulse reconditioning stage alternatively applied in turn, which is subjected
to the initial battery internal impendence detection and battery load detection in vehicle electric system, it could be efficiently
desulphated to the some batteries with deep-charge or no charge for many months, and without any risk if it is connected to the
vehicle electric system.
•
Charge & Maintain - Automatic Maintenance: the battery charger could be left unattended and it is full time managed by program;
when the battery is charged to «full» state, the charger automatically switches to maintain the battery. It will monitor the battery
voltage and continue to peak performance with special pulse charge in long term maintenance.
•
Short circuit or Reverse polarity protection: the charger will automatically turn off when the output short circuit or reverse polarity
occurred and prevent any damage.
•
Never overcharge your battery.
•
Heavy-Duty cables.
| www.bs-battery.com
-
Absorption Charging
-
Voltage analysis
-
Float Mode
-
Long term maintenance pulse charge
3
Publicité
