TFA 60.2523 Mode D'emploi page 13

TFA_No. 60.2523_Anleitung
Radio-controlled alarm clock
• Slide the lateral switch to the position LOCK.
• The current time and the date appear on the display.
• The manually set time will be overwritten by the DCF time,
when the signal is received successfully.
7.2 Setting of the day-of-week language
• Slide the lateral switch to the position LOCK.
• Press and hold ▼ button.
• The seconds disappear.
• The language abbreviations change from one language to
another: German (DE), French (Fr), Italian (IT), Spanish (SP),
Dutch (DA), Swedish (SW) and English (En).
• Release the button when you have selected your desired
language.
7.3 Setting of the second time
• Slide the lateral switch to the position LOCK.
• Press and hold ▲ button.
• F appears on the display.
• Slide the lateral switch to the position "Time set".
• 00 hr (default) appears on the display. Press the ▲ or ▼ button
to adjust the time zone (+/- 12).
24
18.06.2013 9:33 Uhr Seite 13
Radio-controlled alarm clock
• To confirm the setting slide the lateral switch to the position
LOCK.
• The second time with the desired time zone appear.
• Press and hold ▲ button again.
• F disappears and the display will show the current time again.
7.4 Setting of the 12 and 24 hours display
• Slide the lateral switch to the position LOCK.
• Press the ▲ button to choose 12 HR or 24 HR system.
• In 12 HR system PM appears after 12 h on the display
7.5 Setting of the alarm time
• Slide the lateral switch to the position "Alarm set".
• ALARM, the hour and the minute's digit and the alarm symbol
will be flashing.
• Press and hold the ▲ or ▼ button.
• First the display runs through the minutes (forward or reverse),
at the end of two minutes, the display switches to fast speed
and runs through the hours.
• To confirm the setting slide the lateral switch to the position
LOCK.
• The current time and the date appear on the display.
• To activate the alarm function press the Alarm on/off button.
25