'
#
Maintenance instructions
'
Clean the device and the ventilation slots with a dry, lint-free cloth.
Procedures in the event of faults
The device is maintenance-free. However, if any faults do occur, please pro-
ceed as follows.
Fault
Action
The battery is not
Check the battery connection, ensuring correct polar-
being charged.
ity. Check the mains connection.
(see also
thermal switch)
The voltage of the
Start the motor and let it run for approx. 30 seconds.
battery has dropped
Battery voltage rises above 1.5 V. The charging proc-
below 1.5 V.
ess starts automatically.
The thermal switch
Wait for a few minutes. When the device has cooled
was triggered.
down, it switches itself back on automatically.
None of the faults
Please contact the manufacturer:
described here seems
Trautmann GmbH & Co. KG
to apply. But the de-
CALIRA-Apparatebau
vice still does not
Lerchenfeldstr. 9
work.
87600 Kaufbeuren
Internet: www.calira.de
E-mail: info@calira.de
14
!
" # $ %
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
2
2
&