TFA 60.2528 Mode D'emploi page 16

TFA_No. 60.2528_Anl_11_21
BINGO - Radio-controlled alarm clock
• The device is provided with a light sensor to turn on the light automatically
at dark.
• Use the AUTO LIGHT ON/OFF switch at the back to activate or deactivate
the backlight.
• appears or disappears on the display.
• Note:
During a DCF signal reception, the lighting is temporarily disabled or
cannot be activated
10. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the product for a long period of
time.
• Keep the instrument in a dry place.
10.1 Battery replacement
• Change the batteries when the battery symbol
• Open the battery compartment and insert the two new batteries 1,5 V AA.
Ensure that the battery polarity is correct
• Close the battery compartment again.
30
22.11.2021 15:09 Uhr
appears on the display.
Seite 16
BINGO - Radio-controlled alarm clock
11. Troubleshooting
Problem
No display
No DCF reception
No backlight
Solution
➜ Ensure that the batteries' polarity is
correct
➜ Change the batteries
➜ Activate (ON) the DCF reception in
the setting mode
➜ Press the – button for 3 seconds
and and start the reception manually
➜ Choose another place for your product
➜ Wait for attempted reception during
the night
➜ Check if there is any source of inter-
ference
➜ Restart the device according to the
manual
➜ Manual setting of the clock
➜ Set the AUTO LIGHT switch to ON
(see: backlight)
➜ Clock is in the DCF signal reception mode
31