TFA 60.2528 Mode D'emploi page 14

TFA_No. 60.2528_Anl_11_21
BINGO - Radio-controlled alarm clock
7. Operation
• Press and hold – or + button in the setting mode for fast running.
• The instrument will automatically quit the setting mode if no button is
pressed within 15 seconds.
• If the button tone is enabled, each button operation is acknowledged with
a beep.
7.1 Manual settings
• Press and hold SET button at the back in normal mode for three seconds.
• dcF appears on the display and ON (default) will be flashing. If the DCF
reception is activated and after successful reception of the DCF signal no
manual adjustment is necessary.
• Press the – or + button if you want to deactivate the DCF reception (OFF).
• Confirm the setting with the SET button.
• If the DCF reception is enabled (ON), you can set the time zone after con-
firmation with the SET button (TZ appears on the display and 0 default will
be flashing).
• Press the – or + button to adjust the time zone (-9/+9).
• The time zone setting is needed for countries where the DCF signal can be
received but the time zone is different from the DCF time (e.g. +1=one
hour later).
• Confirm the setting with the SET button.
26
22.11.2021 15:09 Uhr Seite 14
BINGO - Radio-controlled alarm clock
• Press the SET button to make the settings in the following sequence: the
hours, the minutes, the year, the month, the day, the temperature unit
(default °C), the day-of-week language (default German), and the button
tone (default OFF). Press the – or + button to adjust it.
• Confirm the setting with the SET button.
• By a successful reception of the DCF reception signal and if the DCF recep-
tion is activated (ON), the manually set time will be overwritten.
7.1.1 Setting of the temperature unit
• Press the – or + button to toggle between Celsius (°C) or Fahrenheit (°F)
as temperature unit select.
• Confirm the setting with the SET button.
7.1.2 Setting of the day-of-week language
• Adjust the desired day-of-week language with the – or + button: German (D),
English (EN), French (FR), Spanish (ES), Italian (IT) or Dutch (NL).
• Confirm the setting with the SET button.
7.1.3 Setting of the button tone
• Normally the button tone (beep) is disabled (OFF).
• Press the – or + button to activate the button tone (ON).
• Confirm the setting with the SET button.
27