Siemens SIMATIC HMI 177 Mode D'emploi page 13

Enabling button
Output type
Rated voltage, switchable
Rated current, switchable, max.
Breaking current, max.
Circuit 1
Circuit 2
Inductive load, max.
Circuit 1
Circuit 2
Reverse polarity protection
Circuit 1
Circuit 2
Short-circuit and overload protection
Circuit 1
Circuit 2
Switching cycles
Switch position 2
Switch position 3
Actuation forces
From switch position 1 to 2, typical
From switch position 2 to 3, typical
Specifications in accordance with EN ISO 13849-1
Stop with PLUS connection box
Category 3
PFH for both channels
d
Enable
Category 3
PFH
d
Panic
Category 3
PFH
d
Order numbers:
1
● DP PLUS connection box: 6AV6671-5AE10-0AX0
● PN PLUS connection box: 6AV6671-5AE11-0AX0
Approval in accordance with EN ISO 13849-1:2008/AC:2009
A5E02519749-04, 12/2012
Solid-state output
24 V DC
Tolerance 19.2 to 30 V DC in accordance with EN 61131-2
400 mA
1.5 A
0.8 A
145 mJ/1.16 H at 24 V DC, 500 mA
(comparable to 13 DC in accordance with EN 60947-5-1)
145 mJ/1.16 H at 24 V DC, 500 mA
(comparable to 13 DC in accordance with EN 60947-5-1)
Yes
Yes
Yes, integrated in the output FET
Yes, through protective circuit
10
5 * 10
5 N
20 N
1
5
4
PL d
1.01 * 10
–7
PL d
1.35 * 10
–7
PL d
1.14 * 10
–7
13