Siemens SIMATIC HMI 177 Mode D'emploi page 10

Safety instructions and general notes
Safety Instructions
Proper use
WARNING
Commissioning of the HMI device is prohibited until it has been absolutely ensured that the machine in which the HMI
device is to be installed complies with Directive 98/37/EC or Directive 2006/42/EC as of December 29, 2009.
Note
All safety functions of the HMI device have a 2-channel configuration and are able to achieve PL d in accordance with
EN ISO 13849-1:2008/AC:2009.
Safety regulations
WARNING
The STOP button and enabling button must be checked periodically for proper functioning.
WARNING
The hazardous location must be visible from the operating position taken by the personnel.
Standards, Cetificates and Approvals
SIBE Switzerland Certification Service
The HMI device and the connection box satisfy Category 3 PL d in accordance with EN ISO 13849-1:2008/AC:2009.
The enabling device safety function for special operation control and the STOP button satisfy the following requirements:
● Category 3 PL d according to EN ISO 13849-1:2008/AC:2009
● Requirements of EN 60204-1:2006, under compliance with the safety instructions detailed in the operating instructions
CE approval
The HMI device and the connection box satisfy the requirements and protection objectives of the following EC directives.
The HMI device and the connection box comply with the harmonized European standards (EN), promulgated in the Official
Journals of the European Community for programmable controllers:
● 2004/108/EC "Electromagnetic Compatibility" (EMC Directive)
● Directive 2006/42/EC of the European Parliament and Council of May 17, 2006, on machinery, and amending Directive
95/16/EC (recast)
10
Approval in accordance with EN ISO 13849-1:2008/AC:2009
A5E02519749-04, 12/2012