Fein ASCM18QM Serie Mode D'emploi page 16

OBJ_BUCH-0000000271-001.book Page 16 Wednesday, December 21, 2016 1:15 PM
en
16
Changing the tool
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting application tools (figure 7).
Open the keyless drill chuck.
Afterwards, insert the desired application
tool.
Tighten the keyless drill chuck.
Mounting application tools (figure 8).
Insert the application tool.
Fig. 7
3.
Drill chuck
2.
Fig. 8
1.