Fein ASCM18QM Serie Mode D'emploi page 15

OBJ_BUCH-0000000271-001.book Page 15 Wednesday, December 21, 2016 1:15 PM
en
15
Mounting the drill chuck (figure 5).
Fig. 5
1.
When changing the drill chuck, avoid debris
from entering the drill chuck and the spindle!
Slide the ring toward the front.
Place the drill chuck onto the spindle.
Release the ring.
Turn the drill chuck to lock it.
Drill chuck
Ring
2.
3.
4.
Removing the drill chuck (figure 6).
Fig. 6
When changing the drill chuck, avoid debris
Ring
from entering the drill chuck and the spindle!
Slide the ring frontwards and pull the drill
chuck off the spindle.
1.
2.
Drill chuck