Yamaha WR250F Manuel D'atelier page 306

2
1
a
1
1
1
2
4 - 19
CARBURETOR
3. Install:
Carburetor 1
G
NOTE:
Install the projection between the carburetor
joint slots.
4. Tighten:
Screw (air filter joint) 1
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
Screw (carburetor joint) 2
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
5. Install:
Throttle cable cap 1
G
6. Install:
Throttle cable 1
G
7. Adjust:
Throttle grip free play
G
Refer to "THROTTLE CABLE ADJUST-
MENT" section in the CHAPTER 3.
8. Install:
Throttle cable cover 1
G
Screw (throttle cable cover) 2
G
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
Install the throttle cable cover with its pawl a
hung on the carburetor.
ENG