JUMO eTRON M Notice De Mise En Service page 42

Parameter Meaning
Currently remaining running time
e.g. for cooling/heating operation etc.
Service interval
The time period after which the equipment unit has to be serviced is set
here. The active relay time is taken into account.
Current service counter for equipment unit connected
This shows how much time has elapsed since the last service.
On reaching the interval
If the counter is reset after a service, the alarm message disappears.
Display of the total operating hours
Active time of relay for maintenance of heating or cooling units.
Temperature display during defrosting
Freeze temperature value during defrosting: 0
Update temperature value continuously: 1
, an alarm message is generated.
Value range
from...factory-set...to
999h ... 2h,
120min ... 2min,
120s ... 0s,
With setting
,
t. i cannot be edited
0 ... 999h ... 9.9t h
0 ... 999h ... 9.9t h
0 ... 999h ... 9.9t h
0, 1
14