Controller
Parameter Meaning
Setpoint
target value of control action (temperature value, current or voltage)
Hysteresis
Low setpoint limit
SP can be set down to this low limit.
High setpoint limit
SP can be set up to this high limit.
Controller type
: cooling controller
: heating controller
Switch-on delay after power-on
for staggered switch-on of several equipment units in a plant.
Value range
from...factory-set...to
... 0.0 ...
0.2 ... 1.0 ... 99.9
-999 ... -50 ... +999
-999 ... 500 ... +999
0 ... 60min
12