ProMinent CLO1 Mode D'emploi page 6

Cleaning set CLO/DGMa for sensor types CLO
4. Remove the flow resister (1) M34x1.5P (740207) at the lower end of the DGMa module (2)
and insert the flow nozzle (3) CLO into the intake plug (1).
5. Screw the flow resister (1) fitted with the flow nozzle (3) back into the lower end of the DGMa
module (2).
5
Fig. 2: Container of cleaning balls (4) with cleaning balls in the lid (5)
6
4
A2803