Immediate Start; Delayed Start - claber Tempo Select 8486 Notice D'instructions

Programming
3. Decide, according to needs or preference, whether the first watering
cycle should start immediately or have a delayed start.

Immediate start

C
m
fig. 4A
C
h
fig. 4B

Delayed start

C
h
fig. 4C
cle, shown in display field "C" above the symbol
Within 10 seconds of selecting a program,
press the "StaRt" button once only: the
m message "0 h" will blink 3 times, after which
h
automatic watering cycle will start immedi-
ately. The symbol
field "C" indicating that the watering cycle is
in progress along with the countdown to the
end of the cycle (fig. 4A).
m
When finished, display field "C" shows the
h
symbol
opening of the next watering cycle (fig. 4B).
Within 10 seconds of selecting a program,
press the "StaRt" button repeatedly until
the display field "C" shows the required time
m
delay, between 1-23 hours, before the opening
h
of the automatic watering cycle (fig. 4C).
The time delay will then blink 3 times, after
which the program will begin the countdown
to the opening of the automatic watering cy-
appears in display
along with the countdown to the
.
US
11