Introduction; Operating Tips - claber Tempo Select 8486 Notice D'instructions

Introduction

Thank you for purchasing Claber Tempo Select water timer. Please read
this instruction manual carefully before starting to program the timer, and
keep it handy for future reference: each section will provide all the neces-
sary information on how to perform the single steps correctly.
This appliance has been designed and manufactured exclusively for
programming irrigation systems.
For any questions regarding this product, call our Customer Service line at
1-800-930-4566 or email us at info@claberinc.com.

Operating tips

1. Use only new AA 1.5V (LR6) alkaline batteries.
2. Replace the batteries at the beginning of each watering season.
3. Wash the filter periodically to prevent clogging.
4.
During winter and/or when the timer is not in use, always remove from
faucet and store in a dry place at temperature no lower than 37.4°F
(3°C); also remove batteries so they can last longer than a single season.
5. Keep out of reach of children and animals.
6. When using for the first time, observe the progress of the program to
ensure that operates correctly.
7. Avoid pulling on hose connected to the timer.
8. Do not use with water pressures lower than 7.3 PSI (0.5 Bar) or
higher than 174 PSI (12 Bar) and with water temperature exceeding
122°F (50°C).
9. Do not install in a valve box, underground or indoors.
10.
Do not use with chemicals or liquids other than water.
11. Do not immerse in water or other liquids.
US
3