Cleaning And Maintenance - claber Tempo Select 8486 Notice D'instructions

Cleaning and maintenance

Wash the filter at beginning of every watering season and inspect it pe-
riodically.
To wash the filter, proceed as follows (fig.6):
• Turn off the tap and loosen the the 3/4" female tap connector (
• Remove the filter (
• Rinse the filter clean under running water (
After washing, reassemble all parts as before.
1
The outside of the timer can be wiped, when necessary, using a soft cloth
moistened slightly with water or with a gentle liquid cleaner, following the
manufacturer's directions of use.
Do not use abrasive pads or scourers, or detergents with a high acid content.
During winter and/or when the timer is not in use, always remove from
faucet and store in a dry place at temperature no lower than 37.4°F
(3°C); also remove batteries so they can last longer than a single season.
➋
).
➌
).
2
US
➊
).
3
fig.6
17