Installation - claber Tempo Select 8486 Notice D'instructions

Installation

US
Fit the timer to an outside water
tap, following these instructions
(fig.3):
1. Screw the 3/4" female fitting
onto the tap. Warning: hand
tighten only, do not force
with tools.
2. Attach the garden hose to
the 5/8"threaded connector
at the bottom of the timer.
• Do not install in
a valve box, under-
ground or indoors.
•
Do not use with chemicals
or liquids other than wa-
ter.
• Do not use with water
pressures lower than 7.3
PSI (0.5 Bar) or higher
than 174 PSI (12 Bar) and
with water temperature
exceeding 122°F (50°C).
8
1
2
fig.3